The DJ Shield - Kit for Arduino give you 5 high-quality buttons and 3 10K linear potentiometers to provide input to your projects. The DJ Shield was designed for use with the Audio Hacker shield but can be used in any Arduino project.
Building the DJ Shield is easy and can be done in 10-20 minutes depending on your experience. All of the soldering is easy. Even if this is your first soldering project, you can do it.
The DJ Shield shield is open source hardware and the
Gather required tools: soldering iron, solder, and wire cutters. I strongly recommend using lead solder with a rosin core. Lead-free solder is much more difficult to work with.
I recommend wearing eye protection when you are clipping off the excess leads on components because the small pieces of metal can go flying in any direction.
Copyright © Built with Volusion