Make your own programmable, ultra-blinky LED belt with this project pack / tutorial. Perfect for parties, raves, parades, weddings, funerals, and bar mitzvahs. Wear it with pride, wear it with blinky! Follow our soldering tutorial to build your own heirloom LED belt, and hand it down to your grandkids.
The project was designed this project to demonstrate how to use the digital LED strip, how to use a Atmega32u4 breakout board with the Arduino IDE, and how to make a portable battery powered project that runs off of AAs. This project is not too difficult, and can be finished in a day. Some soldering experience is good since 'free wire' soldering is a little more difficult than soldering to a PCB, but even beginners should be able to manage. We don't include a tutorial on using the Arduino IDE so its good if you've played around with the Arduino already.
