|
|
| |
0 of 0 people found the following review helpful: |
| |
 |
 |
 |
|
My Second and Third Project |
January 26, 2010 |
| Reviewer:
Neil Tsubota
from Foster City, CA United States
|
|
After I felt confident that my solder skill have not completly disappeared after 4 years of Engineering Classes and 30 years of working. This light brick was my second and THIRD project.
This is an EASY project if you follow the directions.
I even had the pleasure of chatting with author (maker) of this project.
The Maker Magazine you will see this project is in # 18.
You can also get some very useful files at:
http://www.tenmilesquare.com/library
then scroll down until you see the completed light brick.
It was FUN and I plan to do this again.
Also follow the resin casting part from Tap Plastic. I used a # 10 molding kit with the resin and catalyst. This part should be carefully followed and I do NOT recommend children under 10 years old do this part without ADULT SUPERVISION. This stuff heats up (exothermic reaction) very fast. Remember it is a "Catalyst".
Was this review helpful to you? 
|
|
 |
|
 |
|
|
