 |
 |
 |
|
Microcontrollers, meet radios! The ZB1 is a physical computing development system that's compatible with the Arduino software environment, and it's got a socket for an XBee radio for wireless communications and control. (XBee not included.)
|
|
|
|
|
|
 |
|
 |
|
Features
- Compatible with the Arduino development tools
- ATmega168 running at 12MHz with a Vcc of 3.3V
- Socket for XBee radio
- 4.4"x1.75" (uC + XBee), or 2.7"x1.75" if the board is cut to remove the XBee radio. Each half of a cut can be functional
- I/O connections are wired to a single 26-pin header. Application boards can be mounted parallel using vertical connectors, co-planar using right-angle connectors, or remotely using a flexible cable
- Board can be built with either a USB interface or with a 6-pin header for use with an USB-to-serial cable. The USB interface circuitry includes transient suppression and current limiting resistors
- ICSP port (3.3V levels)
- A/D reference supply filtered per Atmel specification
- Reset circuit per Atmel specification
- Power supply is jumpered between either an LDO or an external 3.3V supply. The LDO input is diode or'ed from a wall adapter or the USB 5V supply
- Recommended FTDI 3.3V cable TTL-232R-3V3 (the 5V cable we carry is not compatible with the ZB1)
- Accessories include an LCD board and 2AA power supply
|
|
|
 |
|
 |
|
|
|
