|
|
|
72-pin to 60-pin Converter
Our Price: $16.95
|
8-bit TV-Computer
Our Price: $49.99
|
|
|
|
|
Do you have a drawer full of 8-bit NES cartridges, but your Nintendo console will only give you the "Slow Blink of Death?" Are you tired of blowing on your cartridges, with no success? A TV-Computer (sold here) and this 72-pin to 60-pin converter will help you bring your cartridges back to life! Very hard to find!
|
A fully hackable 8-bit computer is now available for sale in the USA! This easy-to-use 8-bit computer is being sold throughout China, India, and other emerging markets as an educational computer. This computer can also play all your old 8-bit NES cartridges with the help of a our converter (not included).
|
|
|
|
|
|
9V Wall Adapter Plug for Arduino
Our Price: $6.50
|
Arduino 9V Battery Case
Our Price: $4.00
|
|
|
|
|
This high-quality switching 'wall wart' AC to DC 9V 650mA power supply regulates the output to 9V (no more 14V outputs!) -- perfect for the Arduino.
|
Case for 9 volt battery with sliding cover and switch, 6" 26AWG wires, comes with a DC plug to fit the Arduino (assembly required but easy).
|
|
|
|
|
|
Arduino Compatible Electronic Brick Starter Kit
Our Price: $49.95
|
Arduino/Seeeduino Harness
Our Price: $6.75
Sale Price: $5.00
You Save $1.75!
|
|
|
|
|
Using this electronic brick starter kit, you can connect Arduino compatible boards easily with various digital, analog and I2C/Uart interfaces. These breadboard-less firm connections are ready to plug into extension modules like potentiometers, sensors, relays, servos...even buttons, just plug and play
|
Secure your Arduino, Seeeduino or other clone along with a 9V power source. Comes with plug for Seeeduino and an extra 2.1mm DC jack to pin plug adapter but that doesn't fit the Arduinos.
|
|
|
|
|
|
CRAFT: i Craft: things- Leatherman "Squirt" S4 (scissors version)
Our Price: $39.95
Sale Price: $29.95
You Save $10.00!
|
Deluxe Breadboard Jumper Wires
Our Price: $8.95
Sale Price: $6.95
You Save $2.00!
|
|
|
|
|
Small enough to fit on your key chain, the "i Craft: things" pocket tool is the perfect companion for mobile fixing, cutting, hacking and crafting.
|
The set includes 75 awesome flexible jumper wires that can be used over and over again. Each stranded jumper wire has a molded barrel and a 3/8" (approx 1cm) stripped end.
|
|
|
|
|
|
Fiber Optics Kit
Our Price: $25.00
|
Half-Size Breadboard
Our Price: $4.50
|
|
|
|
|
Learn the basics of fiber optics communications while you build this exciting kit. Transmit your voice or 1kHz signal through the fiber optic cable to a receiver hundreds of feet away!
|
Half-size solderless breadboard with adhesive backing.
|
|
|
|
|
|
Hitachi HM55B Compass Module
Our Price: $29.99
|
Ice Tube Clock Kit
Our Price: $70.00
|
|
|
|
|
This Compass Module is a dual-axis magnetic field sensor built around the Hitachi HM55B IC, the compass IC accessible by providing Hitachi’s surface mount sensor chip with a 3 V onboard voltage regulator and resistor protection, all in a 0.3” wide 6-pin DIP module.
|
Somewhere at the junction of modern open-source hardware and early 80’s Russia lives a beautiful new DIY kit called the Ice Tube Clock. The centerpiece of this old-meets-new clock is a Russian-made, 9-digit, vacuum florescent display (VFD).
|
|
|
|
|
|
Learn to Solder Kit
Our Price: $14.95
|
Make Project Tin
Our Price: $5.00
Sale Price: $4.00
You Save $1.00!
|
|
|
|
|
This deluxe version of the Solder Practice kit comes with 30W soldering iron and wire cutters. Lead-free solder included. Builds a flashing European-style-siren.
|
Perfect for small electronics projects, this mint tin is branded with our MAKE motto, "If You Can't Open It, You Don't Own It."
|
|
|
|
|
|
MAKE: Bomb Defuser - Leatherman "Squirt" E4 (electronics version)
Our Price: $39.95
|
Make: Open Sourcerer - Leatherman Juice CS4 Tool
Our Price: $74.95
|
|
|
|
|
Small enough to fit on your key chain, the MAKE Bomb Defuser is the perfect companion for mobile fixing, hacking and MacGyvering.
|
Durability and handiness to the max make the Leatherman CS4 the essential compact folding tool for tinkerers, makers and outdoor enthusiasts alike. This is the "MEGA" version of our popular Make: Warranty Voider
|
|
|
|
|
|
MAKE: Warranty Voider - Leatherman "Squirt" E4 (electronics version)
Our Price: $39.95
|
MAKE: Warranty Voider - Leatherman "Squirt" P4 (plier version)
Our Price: $39.95
|
|
|
|
|
Small enough to fit on your key chain, the MAKE Warranty Voider is the perfect companion for mobile fixing, hacking and MacGyvering.
|
Small enough to fit on your key chain, the MAKE Warranty Voider is the perfect companion for mobile fixing, hacking and MacGyvering.
|
|
|
|
|
|
Memsic 2125 Dual-axis Accelerometer
Our Price: $29.99
|
Mini Breadboards
Our Price: $5.00
|
|
|
|
|
The Memsic 2125 is a low cost, dual-axis thermal accelerometer capable of measuring tilt, acceleration, rotation, and vibration with a range of �2 g. For integration into existing applications, the Memsic 2125 is electrically compatible with other popular accelerometers.
|
Half the size of a half-size breadboard, this Mini Breadboard is perfect for tiny projects and for sticking onto the top of Arduino ProtoShields!
Choose from 5 colors!
|
|
|
|
|
|
PING))) Ultrasonic Sensor
Our Price: $29.99
|
PIR Sensor
Our Price: $9.99
|
|
|
|
|
The PING))) ultrasonic sensor provides a very low-cost and easy method to measure distance using sonar; an ultrasonic pulse is transmitted from the unit and distance-to-target is determined by measuring the time required for the echo return. Output from the PING))) sensor is a variable-width pulse that corresponds to the distance to the target. You will definitely appreciate the activity status LED and the economic use of just 1 I/O pin.
|
The PIR Sensor detects motion up to 20 feet away by using a Fresnel lens and infrared-sensitive element to detect changing patterns of passive infrared emitted by objects in its vicinity.
|
|
|
|
|
|
Propeller Proto Board USB
Our Price: $39.99
|
RFID Card Reader Serial
Our Price: $39.99
|
|
|
|
|
The Propeller Proto Board USB has all the features of the Propeller Proto Board and includes the USB programming interface on the board for those projects which need the USB interface in the application.
|
The Parallax Radio Frequency Identification (RFID) Reader Module is the first low-cost solution to read passive RFID transponder tags.
|
|
|
|
|
|
RFID Disc Sticker
Our Price: $2.75
|
RFID Tag Keychain
Our Price: $1.50
|
|
|
|
|
The RFID Disc Sticker is made of PVC and has 3M adhesive on one side. This tag can be glued on flat and clean surfaces. Available in Read Only.
|
n RFID tag is a microchip combined with an antenna in a compact package; the packaging is structured to allow the RFID tag to be attached to an object to be tracked.
|
|
|
|
|
|
SD Card Shield for Arduino
Our Price: $13.95
|
SD Memory Cards (Secure Digital)
Our Price: $15.00
|
|
|
|
|
he SD Card Shield v2.1 for Arduino is a break out board for a standard SD Card. Now you can add mass storage and data logging to your project!
|
SD (Secure Digital) cards are the most common storage medium among digital cameras.
|
|
|
|
|
|
Solder Practice Kit
Our Price: $9.95
|
Solderless Breadboard
Our Price: $7.95
|
|
|
|
|
Soldering skills rusty or non-existent? This kit will get you in shape quick! In no time you'll be soldering up a storm (and boy do we have the kits to hook you up!)
|
Solderless Breadboard with adhesive backing.
|
|
|
|
|
|
Solderless Breadboard Jumper Wire Kit
Our Price: $6.25
|
Standard LCD 16x2
Our Price: $12.00
|
|
|
|
|
Kit provides 140 insulated, pre-stripped 22 AWG wires. Goes perfect with any solderless breadboard project.
|
Standard HD44780 LCDs are useful for creating standalone projects. They are really easy to use with an Arduino, thanks to the LCD libraries that are available to download.
|
|
|
|
|
|
Surface Mount Technology Kit
Our Price: $25.00
|
USB-TTL Serial Cable
Our Price: $20.00
|
|
|
|
|
The future of electronics is headed for miniaturization through surface mount technology (SMT). This kit has all parts and instructions to give you experience on working with surface mount components.
|
The new TTL-232R is a USB-TTL serial converter cable that makes it easy to connect serial TTL level devices to USB.
|
|
|
|
|
|
Wooduino
Our Price: $12.50
|
XBee
Our Price: $25.00
|
|
|
|
|
Wooduino is a wooden prototyping platform for the Arduino. Available in two models, standard and deluxe.
|
This is a XBee 802.15.4 protocol 1mW wireless module, good for point-to-point, multipoint and convertible to a mesh network point.
|
|
|
|
|
|
XBee Adapter Kit
Our Price: $10.00
|
|
|
|
This adapter board is designed to make adding wireless point-to-point or mesh networking easy. The kit includes a PCB and all components necessary to build the adapter, unassembled.
|
|
|
