Home > Browse All Products > Kits > Electronics Kits > Intermediate Electronics Kits >

  The Ultimate Useless Machine Kit
The Ultimate Useless Machine Kits
The Ultimate Useless Machine Kits


 
Alternative Views:


Our Price: $34.99

Availability: Usually Ships in 1 to 2 Business Days
Product Code: MKFE1
This Product Is Currently Unavailable

Description How To
 

The Ultimate Useless Machine Kits What's a useless machine? It's a machine that you turn on and it turns itself off. Why on earth would you want one? Because it's so darn entertaining! The Useless machine started out as a simple Instructable with a video, which quickly went viral. Since then the video has been viewed over 8.4 million times and the Machine has been featured in MAKE magazine and on the Colbert Report!

Now you can build your own Useless Machine with the Ultimate Useless Machine kit. It features a black, laser cut acrylic case with a back-lit acrylic finger. The kit was designed with beginning makers in mind and features a custom circuit board to make soldering the electronics a breeze. Expect the assembly to take about an hour, and the fun to last indefinitely!

This version features laser cut acrylic hinges that offers years of trouble free operation. Make something useless today!

We also carry a parts only kit if you want to create a personalized, custom enclosure.

Requires Some Soldering
Features


  • Laser-cut acrylic case
  • Custom circuit board
  • Finger/Cam mount
  • Clear, back lit acrylic finger
  • 21 x 4-40 Nuts/Bolts (one extra/each)
  • 2 x #4 screws
  • 5 x #2 screws
  • Rubber feet
  • Velcro for battery holder


Average Customer Review: 4.5 of 5 | Total Reviews: 5 Write a review.

  1 of 1 people found the following review helpful:
 
It's absolutely "Useless" (but fun!) March 18, 2013
Reviewer: Del Ahlstedt from Lexington, SC United States  
It's a great starter project. This kit will assist in developing both physical and electrical assembly skills. The directions are easy to follow, and will guide even a novice in creating one of the most "useless" pieces of logic circuit driven mechanics.

You'll need a low temp soldering iron, rosin core solder, a pair of needle nose pliers, a set of wire cutters, a small Philips screwdriver, and a pair of scissors. A set of "third-hands" will make work on the small PCB easier, but is not absolutely needed.

Completing the kit will provide hours of  entertainment as your friends and acquaintances try and figure out what's happening.

BTW, the LEDs make this version great for dim or lights out rooms.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Awesome!!!! March 6, 2013
Reviewer: Scott from Tulsa, OK United States  
I got two of these and built them with the help of my daughter.  We both enjoyed them tremendously.  I'm going to figure out a way to slow down the "finger" to make it more dramatic.  Also, on one of the builds we didn't notice the "protective cover" on the black box pieces.  This turned out to be a good thing though, as that box seems built better and is more quiet in operation.  We did take the cover off the outside of the box as it had peeled up a bit during assembly (that's when we noticed our error), but left it on the inside of the box.  That one box just feels built better as the extra plastic makes the box "tighter" and a tad heavier.  So do that if you can while you build yours.  We took it 100% off on the second box, and it just isn't the same.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Fun Stuff January 11, 2013
Reviewer: Richard from Riverside, CA United States  
This is s great kit. The only complaints I would have is that the plastic hinge  model should be discontinued. I would have bought metal if I had know it was offered. Also the battery holder is so tight you can install batteries and have the positive battery contact held clear of the box connector.

Was this review helpful to you?

  3 of 3 people found the following review helpful:
 
Response to Reviewer: CJ Baar from Aurora December 8, 2012
Reviewer: Brett Coulthard from Regina, SK Canada  
As the manufacture of The Ultimate Useless Machine, I have to disagree with CJ Baar's review about the parts being easy to break.

If you drop the machine on the floor, yes it will break.

We were at Maker Faire New York and not one machine broke after thousands of visitors operated and handled them.  

They even survived the trip down to New York with United Air Lines!

The Shed would not be selling them if there was a problem with parts breaking.

We stand behind our product and design: free replacement parts including shipping (for one year after purchase).  

If you don't find our product completely useless (or defective in any way) please return it for a full refund.

Sincerely,
Brett Coulthard
CEO
The Frivolous Engineering Company Inc.



Was this review helpful to you?

  0 of 2 people found the following review helpful:
 
Great project; poor construction November 3, 2012
Reviewer: CJ Baar from Aurora, CO United States  
This is a fun project to build and play with. However, it is another great project brought down by a poor acrylic case. The pieces are very easy to break with almost no pressure at all.

Was this review helpful to you?


Browse for more products in the same category as this item:

Browse All Products > Kits > Electronics Kits > Intermediate Electronics Kits
Level
Browse All Products
Browse All Products > Kits
New Arrivals
Browse All Products > Kits > Electronics Kits
Level > Beginner
Sign up for our newsletter to receive exclusive deals and discounts