$5 shipping on US orders $75+

877-306-6253

Blinky Grid Red SMT

MORE VIEWS:

Blinky Grid Red SMT
Blinky Grid Red SMT
Blinky Grid Red SMT

Blinky Grid Red SMT

Don't just say it - Blink it. Then reprogram and blink something else - both the soldering assembly and the reprogramming are a cinch.

$21.99

Product #: MKWL07

The Blinky Grid is a reprogrammable LED matrix that comes in an easy to assemble kit. It makes for a great learning experience - no rocket science, crazy complex tools, or frustratingly teensy parts involved. All parts are the largest surface-mount package available.

 

56 LEDs display text and animations in a variety of ways. The Blinky Grid is a standalone product and includes a pre-programmed microcontroller. Want to say something new? Hold the Blinky Grid up to your monitor - a web page updates the display. Two squares on the web page blink to transmit the new message or animation to the Blinky Grid microcontroller.

 

 

Blinky Grid requires 2 AA batteries for use. Assembly requires a soldering iron and solder,  diagonal cutters, and optionally, a hot glue gun and wire strippers.


Wayne and Layne kits employ fully open-source designs  - they believe in sharing. The Blinky Grid and Blinky POV are hack-friendly.

Custom, professionally-made PCB provides for an easy soldering experience.

Parts List:

(1) Blinky Printed circuit board – PCB
(1) CR2032 Battery holder – BT1 (unlabelled)
(8/56) Light Emitting Diodes (LEDs), 5mm – D1 through D8/D56
(1) PIC 16F1823 Microcontroller – U1
(1) Pushbutton – SW1
(2) 10 kΩ resistors – R1, R2
(1) 0.1uF ceramic capacitor – C1
(1) Power switch
(2) Ambient light sensors – D, C
(2) CR2032 lithium battery cell BT1 (unlabelled)
(2) Butterfly clasp and pin back

To construct a Blinky Grid or Blinky POV, you'll need the kit, a soldering iron and solder, and anything extra you want to use for surface mount.

Instructions are included with the kit but are also available here.

Blinky Programmer Website

Customer Reviews

Based on 1 review Write a review