Cypress PSoC 4 Prototyping Board

Cypress PSoC 4 Prototyping Board

PRE-ORDER ONLY. SHIPS IN 4-6 WEEKS.

The original PSoC Pioneer Kit that started it all. This kit is an easy-to-use and inexpensive development platform enabling you to create unique designs with the flexibility of PSoC 4.

$4.00

It takes approximately 4-6 weeks for this product to arrive once you order.


This is a low cost prototyping platform for customers wishing to test and develop applications using the PSoC® 4 device family. Two boards have been developed to support the following two PSoC 4 device families: 4100 and 4200. The prototyping kits support PC connectivity through the Cypress USB-Serial controller. The devices can be programmed using the USB-Serial controller and the Bootloader Software Host tool.


Low Cost Alternative to Samples

The CY8CKIT-049 Prototyping Kits serve as a low cost alternative to customers looking to sample PSoC 4 devices. The kit provides an open platform and complete access to all of the PSoC 4 device I/O, including default features such as LEDs and a push button. The kit will serve users who are looking to rapidly integrate, develop, and test the PSoC 4 device family with their end design or project.


Supports PSoC 4 Families

The CY8CKIT-049 Prototyping kits support both the ARM® 32-bit Cortex-M0™ CY8C41xx and CY8C42xx device families. The PSoC 4 devices are the most reconfigurable ARM based processor providing programmable analog and digital blocks with flexible routing and interconnects. The CY8CKIT-049 Prototyping kits are also CapSense enabled as both the CMOD and CTANK capacitors necessary for CapSense and CapSense Proximity designs are loaded by default. As always the PSoC 4 device family and the CY8CKIT-049 are supported through the completely free development platform PSoC Creator.


Supports USB-Serial Controllers

The CY8CKIT-049 provides customers with a USB PC connection using the Cypress USB-Serial device family (CY7C6521x). The device used on the CY8CKIT-049 is the CY7C65211 configurable USB bridge controller. This USB-Serial device supports USB-UART, USB-GPIO, USB-I2C, and USB-SPI configurations. The device family also supports CapSense button control and USB-IF Battery Charging applications. The CY7C65211 device on the CY8CKIT-049 Prototyping kit is by default a USB-UART serial bridge. The USB-Serial device provides USB-UART communication through a COM port and UART bootloading using the Bootloader Host tool included in PSoC Creator. The CY7C65211 is designed to support the PSoC 4 and to be a development platform for USB-Serial users. The USB-Serial portion of the kit can be removed from the PSoC 4 main board by ‘snapping’ the two boards apart along the perforated edge. The USB-Serial board supports open GPIO and serial communication headers for USB-Serial development.


PSoC Creator IDE

PSoC Creator is an Integrated Design Environment (IDE) which allows concurrent hardware and application firmware design of PSoC 3, PSoC 4, PSoC 4 BLE, PRoC BLE, and PSoC 5LP systems. PSoC systems are designed using classic, familiar schematic capture supported by over 120 pre-verified, production-ready PSoC Components™. To download the latest version of the IDE, please visit the PSoC Creator Page.


Kit Contents

  • CY8CKIT-049 4xxx Prototyping
  • Kit Quick Start Guide