$5 shipping on US orders $75+


ELEV-8 Quadcopter Kit


ELEV-8 Quadcopter Kit
ELEV-8 Quadcopter Kit
ELEV-8 Quadcopter Kit
ELEV-8 Quadcopter Kit
ELEV-8 Quadcopter Kit

ELEV-8 Quadcopter Kit

This quadcopter is large enough for outdoor flight with room for payload and attachments. Get flying!


Product #: MKPX23

Note: RC radio equipment and battery are not included in this kit.

The ELEV-8 Quadcopters is lifted and propelled by four fixed rotors. There are no fixed wings; all of the lift is created from the rotors. Unlike standard helicopters, a quadcopter uses fixed-pitch blades, whose rotor pitch does not vary as the blades rotate; control of vehicle motion is achieved by varying the relative speed of each rotor to change the thrust and torque produced by each.

The quadcopter uses a HoverFly board with a Propeller multicore microprocessor to electronically control stabilization of the aircraft. The benefits to this system are a stable platform, with no mechanical linkages for a small maneuverable and agile aircraft.

The kit provides an inexpensive way to get involved in the quadcopter arena. The kit includes; frame, mounting hardware, motors, speed controllers, propellers and the control board for flight stabilization. We recommend a six channel RC radio.

The ELEV-8 platform is large enough for outdoor flight and has plenty of room for payload and attachments (up to 2 lbs).

Please note: This kit is not for beginners, it takes a moderate amount of mechanical skill for building and flying. The ELEV-8 quadcopter kit requires an average of 8 hours to assemble; RC experience and a crash pack is highly recommended!
  • Light weight 2.5 lbs fully assembled (without battery)
  • Size 18 3/8 inches (467 mm) motor center to motor center -- 20 1/4" X 20 1/4 inches (514 mm) -- Main body/frame 7" X 7" (177mm) -- Height 7" (177mm)
  • 2 - APC 10 X 4.7 Pushers
  • 2 - APC 10 X 4.7P Composite Propellers
  • 4 - Turnigy Plush-25A ESCs
  • 4 - Brushless Outrunner 1000 kv Motor
  • 4 - Anodized 6061 5/8" - .035 aluminum round tube
  • Open under body for camera mounting options
  • Open Source; design files available online Highly modifiable, for custom additions
  • Protected Electronics Common 4-40 hardware Modular frame for fast repair
  • Protective motor mounts
  • Can fly with added payloads up to 2 lbs
  • Customer Reviews

    Based on 1 review Write a review