Netduino Go Starter Kit

MORE VIEWS:

Netduino Go Starter Kit
Netduino Go Starter Kit
Netduino Go Starter Kit
Netduino Go Starter Kit
Netduino Go Starter Kit
Netduino Go Starter Kit
Netduino Go Starter Kit
Netduino Go Starter Kit

Netduino Go Starter Kit

$99.99

DETAILS

This plug-and-play kit has 4 times the speed, 6 times the code space and twice the RAM of the Netduino Plus!

Product #: MKND04

The Netduino Go Starter Kit is plug-and-play. It offers 4 times the speed (168MHz), 6 times the code space (384KB) and twice the RAM (100KB+) of the Netduino Plus. The peripherals are virtualized and contain a microchip that works with the mainboard. All you have to do is pick what you need and plug it in.

 

The kit is designed to get you up an running quickly. No soldering required. It includes the Netduino Go mainboard, one button module, shield base (beta, see below) module, potentiometer module, RGB LED module, two 5cm Go cables, two 10cm Go Cables, and a 3 foot micro USB cable. It's like freedom, in the form of electrons.

 

All Netduino Go hardware is production hardware. We're shipping the production Shield Base hardware with early beta firmware so that we can get wide feedback on this new virtualization technology. And to say thank you for beta testing the Shield Base, we've temporarily upgraded its 128KB-flash MCU to a full-blown 512KB-flash 120MHz Cortex-M3 microcontroller. You can connect it to power and a USB-TTL serial cable and use it as a traditional Netduino if you'd like as well while enjoying its 3 serial ports and other new enhancements.

 

Both the Netduino Go and the Shield Base run production versions of .NET MF 4.2 QFE1 (RTM).

Includes:
Netduino Go Mainboard
Button Module
Shield Base Module
Potentiometer Module
RGB LED Module
Two 10cm Go Cables
3ft micro USB Cable


Processor and Memory
STMicro 32-bit Microcontroller
Speed: 168MHz, Cortes-M4
Code Storage: 384 KB
RAM: 100+ KB
STM32F405RG (datasheet)
STM32F405RG (reference manual)

LEDs
Power LED: White
Socket LEDs: 8 blue

Buttons
Activates bootloader (hold on boot)
Can be used as GPIO input

I/O Features
All 8 sockets are compatible with Go Bus Modules
Up to 2 sockets are compatible with Gadgeteer S-U-X modules.

Power
Input: Powered via USB (computer or 5V charger - USB cable included.)
Output: 5 VDC and 3.3 VDC Switched
Max Current: 25 mA per pin
Digital I/O are 3.3V (5V tolerant)

Environmental
Operating Temperature: 0 - 70 ï¾°C (32 - 158 ï¾°F)
RoHS Compliant
Lead free