Printrbot Plus 3D Printer (Assembled)


Printrbot Plus 3D Printer (Assembled)
Printrbot Plus 3D Printer (Assembled)

Printrbot Plus 3D Printer (Assembled)

Ships from manufacturer in 2-3 weeks. Note: This product is not available for International shipping.



This high-quality printer is the top of the line model from our friends at Printrbot with a heated bed for ABS printing

Product #: DSPB8

The Printrbot PLUS 3D Printer now comes assembled, so you can start printing right away! The PLUS is the largest Printrbot available and features an 10" x 10" x 10" build area, laser-cut birch and machined aluminum construction, 12mm rod support on all axis, Ubis hot-end extruder, and a heated bed for ABS printing. Includes 1/2 lb of biodegradable 1.75 PLA filament to get you started.


Have questions? See our 3D printer comparison grid to quickly identify which printer is right for you. Read our 3D Printing FAQ, or pick up our Ultimate Guide to 3D Printing which explains what it is and how to get started, and features a buyer's guide, showcasing 15 of the most popular printers on the market, to help prospective buyers make smart choices.


1.75mm PLA or 1.75mm ABS filament.
  • Build Volume: 10″ x 10″ x 10″ / 1,000 cubic inches / 254 x 254 x 254 mm
  • Print Resolution: 100 Microns
  • Print Speed: 60mm/second – suggested maximum
  • Filament: 1.75mm PLA or ABS (sample included)
  • Extruder: Alu Extruder (direct drive) with 1.75mm Ubis Hot End with 0.4mm nozzle
  • Auto Leveling: Auto-Leveling Probe works with software to calibrate Z axis height
  • Print Bed: Mic 6 machined aluminum plate with heated bed
  • Construction: 1/4″ laser cut birch wood, machined aluminum, 3/8″ Acme threaded rod, and 12mm diameter linear shaft
  • Belt: GT2
  • Pulleys: 20 tooth, dual flange GT2 aluminum
  • Electronics: Printrbot Rev D Printrboard with micro-USB connection (cable included) and micro SD card slot for untethered printing
  • Power Requirements: 12V (29 amp) ATX power suppy (included)
  • Motors: NEMA 17 stepper
  • Overall Footprint*: 24″ x 18″ x 17″ (L x W x H)
  • The printer head moves on the X (left to right) and Z (up and down) axes, while the heated print bed moves on the Y (backward and forward) axis. The Mic 6 aluminum bed is extremely flat and works with an Auto-Leveling Probe with the user-chosen software to calibrate the height of the print head. The 1.75mm Ubis Hot End has a maximum resolution of 100 microns and includes a fan to help solidify the molten filament as it is extruded onto the print bed. The printer uses open source software and connects to the computer using the included mini-USB cable. Using a micro-SD card (sold separately), the printer can be disconnected from the computer for untethered printing during long print jobs.

    The guide rails have a 12-mm diameter for stability and have linear bearings for smooth movement of the print head and bed. The GT2 belt and aluminum pulley system facilitates precise movement of the print head and bed. The NEMA 17 stepper motors meet the National Electrical Manufacturers Association (NEMA) standard ICS 16-2001.
    Assembly Instructions for the Printrbot Aluminum Extruder