 |
 |
 |
|
The Series 1 3D Printer from Type A Machines offers the largest build area (9" x 9" x 9") in its class, allowing you to print large objects without taking up all of your desk space. The machine is capable of printing layers as small as 0.1mm on normal settings, and was awarded "Best in Class" by the Make: Ultimate Guide to 3D Printing.
Advanced vector based acceleration lets the Series 1 print at speeds up to 90mm/s with 250mm/s transitions. The machine is optimized for printing with 1.75mm PLA plastic through two nozzles, letting you print in two colors or using water soluble support structures.
Have questions? See our 3D printer comparison grid to quickly identify which printer is right for you. Read our 3D Printing FAQ, and our buyer's guide to the 3D printers we carry in the Maker Shed. Or pick up our Ultimate Guide to 3D Printing which explains what it is and how to get started, and features a buyer's guide, showcasing 15 of the most popular printers on the market, to help prospective buyers make smart choices.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Series One Technical Specs
- Printing
- - Reported as the “Best in Class” by Make‘s Ultimate 3D Printer Guide
- - Affordable price-per-unit-volume build envelope
- - Single head configuration: (X,Y,Z): 260 x 230 x 230 millimeters or 13.75 liters - Dual head configuration:
- - Single extruder prints: (X,Y,Z): 225 x 230 x 230 millimeters or 11.9 liters
- - Dual head/Dual extruder prints (X,Y,Z): 195 x 230 x 230 millimeters or 10.3 liters - Layer thickness:
- - Easily handles thicknesses from 0.3mm down to 0.1mm
- - For the experimenters, the machine can go as low as 0.1mm or less.. - High-res nozzle diameter: 0.35mm
- - High speed extrusion up to 90 mm/s
- - Maximum recommended extruder temperature: 230 C (185C for PLA).
- - Positioning precision:
- X : 13.34 micrometers Y: 6.67 micrometers Z: 1.25 micrometers
- Materials
- - Built for 1.75mm PLA filament, will print with ABS (with upgrade kit) and other materials - Filament diameter: 1.75 mm
- Software
- - Compatibility: Linux, Windows, and Mac OSX - Marlin Firmware
- - High step-rate
- - High cornering speed
- - Interrupt based movement with real linear acceleration
- - Supports both the popular Pronterface and Repetier interfaces. - Slicing software via both Slic3r and KISSlicer
- - Covers all major file Types: STL, AMF, OBJ, G-code
- Electronics
- - Uses popular open-source RAMPS (RepRap Arduino Mega Pololu Shield) module - Supports 5 axis, 1/16 micro-stepping motor control.
- Mechanical
- - Features the Winchester extruder. Precision milled, high force, torsion spring tensioned, radial bearing idler.
- - High precision linear bearings
- - Precision ground 8 and 12mm smooth rods
- - Overall dimensions: 42x44.5x43.8cm (16.5” x 17.5” x 17.25”)
- - Shipping weight and dimensions: 51x51x51cm 12.25kg (20”x20”x20” @ 27 lbs.)
|
|
|
|
|
|
|
|
|
