Home > Browse All Products > Arduino > Arduino Shields >

  16-Channel 12-bit PWM/Servo Shield
16-Channel 12-bit PWM/Servo Shield
16-Channel 12-bit PWM/Servo Shield


 
Alternative Views:


Our Price: $17.99
Sale Price: $14.99
You save $3.00!

Availability: Usually Ships in 1 to 2 Business Days
Product Code: MKAD63
Qty:

Description How To More Details
 
16-Channel 12-bit PWM/Servo Shield . You want to make a cool Arduino robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that the Arduino has only a few PWM outputs, and maybe those outputs are conflicting with another shield! What now? You could give up OR you could just get our handy PWM and Servo driver shield. It's  Arduino-ready and works with any Arduino that uses shields: Uno, Leo, Mega, ADK, its all good.
Features


  • There's an I2C-controlled PWM driver with a built in clock. That means that, unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller, its completely free running!
  • It is 5V compliant, which means you can control it from a 3.3V Arduino and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)
  • 6 address select pins so you can stack up to 62 of these on a single i2c bus, a total of 992 outputs - that's a lot of servos or LEDs
  • Adjustable frequency PWM up to about 1.6 KHz
  • 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
  • Configurable push-pull or open-drain output
  • Terminal block for power input (or you can use the 0.1" breakouts on the side)
  • Reverse polarity protection on the terminal block input
  • Green and red power-good LEDs
  • 3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1" so you can only stack 4 next to each other on 0.1" header
  • Stackable design. You'll need to pick up stacking headers and right angle 3x4 headers in order to stack on top of this shield without the servo connections getting in the way.
  • A spot to place a big capacitor on the V+ line (in case you need it)
  • 220 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial
  • Solder jumpers for the 6 address select pins
  • A lot of extra space remaining? Let's turn it into a prototyping area. You get a 5x20 proto area for any extra wiring you'd like to add

Related Products:
Regular Servo
Sale Price: $9.49

Add
Standard Servos
Continuous Rotation Servo
Sale Price: $9.49

Add
Continuous Rotation Servo
Micro Servo
Our Price: $9.99

Add
Micro Servos

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Browse All Products > Arduino > Arduino Shields
Browse All Products > Arduino
Browse All Products
Sale
Sign up for our newsletter to receive exclusive deals and discounts