FREE shipping on all orders over $50 (US only) FREE shipping on all orders over $50!

877-306-6253

Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix

MORE VIEWS:

Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix
Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix
Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix
Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix

Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix

This RGB LED NeoPixel Matrix has 64 eye-blistering RGB LEDs Arranged in an 8x8 matrix … More>

$34.99

Product #: MKAD73

The Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix has 64 eye-blistering RGB LEDs adorn the NeoMatrix for a blast of configurable color. Arranged in an 8x8 matrix, each pixel is individually addressable. Only one microcontroller pin is required to control all the LEDs, and you get 24 bit color for each LED.

 

Wiring it up is easy: there are two 3-pin connection ports. Solder wires to the input port and provide 5VDC to the +5V and ground pins, then connect the DIN pin to your microcontroller. If you're using our NeoPixel Arduino library, use digital #6. You'll also need to make a common ground from the 5V power supply to the microcontroller/Arduino. Since each LED can draw as much as 60mA (thats up to 3.5 Amps per panel if all LEDs are on bright white!) we suggest a 5V 2A power supply. For most uses, you'll see about 1-2A of current per panel. 


If, say, you need MORE blinky, you can chain these together. For the second shield, connect the DIN connection to the first panel's DOUT. Also connect a ground pin together and power with 5V. There you go! You can chain as many as you'd like although after 4 or more panels you may run low on RAM if you're using an UNO. Watch your power usage too, you may need a 5V 10A power supply for so many of these!

There is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microconroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. The wonderfully-written Neopixel library for Arduino supports these pixels! As it requires hand-tuned assembly it is only for AVR cores but others may have ported this chip driver code so please google around.

  • Dimensions: 71.17mm / 2.8" x 71.17mm / 2.8" x 3.28mm / 0.12"
  • Weight: 24.21g
  • An 8MHz or faster processor is required.

    The detailed NeoPixel Uberguide
    has everything you need to use NeoPixels in any shape and size. Including ready-to-go library & example code for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo, Trinket/Gemma, Arduino Due & Arduino Mega/ADK (all versions)