877-306-6253

LED Dice (Die) Kit

MORE VIEWS:

LED Dice (Die) Kit
LED Dice (Die) Kit
LED Dice (Die) Kit
LED Dice (Die) Kit

LED Dice (Die) Kit

Now $16.99$19.99 USD

Color:

DETAILS

Build your own red or green die that lights up with a number between 1 and 6 with this kit … More>

Product #: MKSKL09-0001

LED Dice (Die) Kit

Note: The name Dice kit sounds a great deal better than ムDie Kit', so the maker bent the English grammar rules just a little in the name of making a marketable product. There is only one die per kit (you do have your choice of red or green LEDs).

Designed for beginners, the kit comes with everything you need to make one ムElectronic Die'.

What does it do?
Tap the completed kit on the table and the LEDs light up and show a number from 1 through 6. After a short while, the LED dice goes into sleep mode, until the next time it is tapped. The kit is easy to solder together, making it a great kit for anyone wanting to jump into the kit making arena.

Please note: Some easy soldering is required.

How does it work?

The principle is rather simple.

The Dice kit ムreads' the impact using the piezo sensor that you will be gluing to the bottom acrylic base.

This sensor reading enters the PCB as analog voltage. A short burst of energy that passes through a voltage limiting, and direction setting Diode (D1). The Diode protects the somewhat sensitive PIC chip from an over voltage.

This reading, or we can call it a ムSignal' is read by the PIC on one of the 8 Legs. The reading is analog, the chip converts this analog information into a decimal value.

For Example, : If the piezo sends 1.22348 volts into the PIC, it is interpreted as ム1.22348' volts. In order to obtain a random result between 1 and 6, we have developed a way of converting results to 1-6 by a reading from the least significant decimal place, we use that information to generate the associated number on the face of the Dice kit.

The 10mm chunky LEDs are connected through resistors to the PIC chip, and light up the result. In fact the LEDs are actually flashing on and off. The PIC found on the Dice kit, has a limited number of pins, so the seven LEDs are controlled by four pins. After a pause of about 15 seconds, the PIC enters sleep mode, and turns off the LEDs. In sleep mode, the PIC is in a very low power mode. The instant the Dice kit is struck, the piezo sends a pulse that immediately wakes up the PIC, and starts running the program once again.
Online instructions can be found here