Bare Conductive Touch Board

Bare Conductive Touch Board
Bare Conductive Touch Board
Bare Conductive Touch Board
Bare Conductive Touch Board
Bare Conductive Touch Board
Bare Conductive Touch Board
Bare Conductive Touch Board
Bare Conductive Touch Board
Bare Conductive Touch Board
Bare Conductive Touch Board
Bare Conductive Touch Board
Bare Conductive Touch Board

Bare Conductive Touch Board

Touch Board is a tool to make your projects interactive, responsive, smart or just fun. It’s designed as an easy-to-use platform for a huge range of projects

$89.99

The Touch Board by Bare Conductive gives you the power to interact with the world around you by turning almost any conductive material or surface into a sensor. Simply connect conductive (or slightly conductive) material to one of the Touch Board's 12 electrodes to trigger a sound via its onboard MP3 player, play a note over MIDI, send a keystroke to your computer, or perform any action you can do with an Arduino or Arduino-compatible device. 

Based around the ATmega32U4 and with a running speed of 16MHz at 5V, this touch board delivers an unbelievable speed for its size. Like an Arduino, it can be easily programmed using the Arduino IDE software (1.5.6 or later).

The Touch Board is designed to be an easy-to-use platform for a broad range of interactive projects and is a perfect match for Bare Conductive Electric Paint. Use the Touch Board and conductive paint to draw your own light switch, make a paper piano, a cardboard theremin, or create a custom interactive surface.

 

*Micro USB cable, Electric Paint, and 3.7V LiPo battery not included.

 

Click here to check out how one innovator created musical instruments with this touch board

Click here to see how this touch board can be used to manage change in capacitive input

  • Touch sensing – The world is your interface!
  • Distance sensing – You don’t need to touch your sensors to use them!
  • No programming required – Unless you want to!
  • Arduino-compatible – Easy to program and works with popular shields
  • Works great with Electric Paint – Or any other conductive material
  • MP3 Player / MIDI device – Make a symphony of sounds!
  • MicroSD Card included – Change the sounds by uploading new files.
  • Amplified 3.5mm audio jack – Works with standard headphones and speakers
  • Lithium polymer (LiPo) charge circuitry – Create stand alone projects that recharge via USB (LiPo battery not included.)
  • HID capable – Turn the Touch Board into a keyboard or mouse
  • Arduino compatible (recognised as an Arduino Leonardo in IDE)
  • Atmel ATMega32U4 Microprocessor
  • Freescale MPR121 dedicated touch interface
  • VLSI VS1053B audio processor
  • Arduino Shield Compatible (check pins available)
  • 32 KB of Flash Memory of which 4 KB is used for bootloader
  • 5V operating voltage (automatic voltage selector for USB or battery operation)
  • Built in LiPo battery charging with onboard boost circuit for 5V operation
  • 16 MHz clock speed
  • Can be powered and programmed over USB
  • 20 digital I/O pins (3 used for Touch IC and 5 for MP3 IC – can be disabled)
  • 7 PWM channels
  • 12 analog input channels
  • 12 Touch electrodes of which 8 can be configured as extra digital inputs or outputs with PWM capability
  • 84mm x 62mm foot print with maximum height of 10mm (audio connector)
  • On/Off switch when powered from battery
  • Customer Reviews

    No reviews yet Write a review