Electronic Components

A half-size solderless breadboard with an adhesive back, perfect for tiny projects that need to stick in place.

A compact 9V battery case with sliding cover, switch, and DC plug wiring, an easy power solution for Arduino and other electronics projects.

A compact 3.3 x 2.1 inch transparent breadboard with adhesive backing, offering one terminal strip and two distribution strips.

A half-size solderless breadboard bundled with a power supply module and jumper wires for fast, tidy circuit prototyping.

A continuous rotation micro servo that pairs easily with Arduino or micro:bit for robotics, animatronics, and RC builds.

Sew smart with stainless steel conductive thread built for e-textiles, offering solid conductivity and corrosion resistance for wearable circuits.

A six-color mini breadboard bundle plus jumper wires, sized perfectly for small projects or mounting atop your MakerShield.

Over 100 essential clips, cables, and wires for breadboarding, Arduino, Raspberry Pi, and micro:bit projects in one handy pack.

Conductive nylon and copper tape rolls for wearable tech, paper circuits, and craft projects, ideal for classrooms and makerspaces.

200 LEDs in one case — 100 each of 3mm and 5mm across five colors, perfect for electronics classrooms or stocking up your parts bin.

This 0.96" OLED display packs 128x64 pixels and codes easily in MakeCode, a must-have low-cost accessory for micro:bit projects.

This breadboard connector cartridge links your Oxocard Connect to breadboards for expanded electronics experimentation.

The Oxocard Expansion Cartridge exposes its pins for simple circuits, letting you wire sensors and actuators directly.

The Pixelmatrix Cartridge packs 25 addressable RGB LEDs and diffusers for your own custom lighting projects on the Oxocard.

A cabled ultrasonic distance sensor that measures range with sound pulses, perfect for robotics and obstacle-avoidance projects.

Measure VOCs, NOx, and CO2 levels with the Oxocard Air Cartridge's built-in Sensirion sensors, ideal for classroom air-quality projects.

60 standard 5mm LEDs in six colors, perfect for throwies, classroom electronics, and everyday circuit experimentation.

Bridge alligator clips to breadboards and micro:bit pins with this 10-lead set — an easy way to wire up Makey:bit and other maker electronics.

A 10-pack of alligator-to-alligator test leads in five colors for quick, solder-free connections in electronics projects and classroom demos.

65 flexible male-to-male jumper wires in assorted lengths, everything you need to wire up your next breadboard project.

These OV5647 camera modules bring 5MP video to your Raspberry Pi, with standard and IR night-vision options for any vision project.

This 37-in-1 Sensor Kit packs everything from temperature and sound sensors to a joystick and buzzer into one breadboard-ready bundle.

Shake It Mini packs a coin-cell battery and vibrating motor onto one tiny PCB — snap it out for wearables or conductive tape and thread crafts.

The bit:buddy gives your micro:bit a compact, complete power solution perfect for wearable tech and on-the-go projects.

Conductive nylon and copper tape with a fun Makey Robot dispenser, perfect for wearable and paper circuit projects.

Detect LPG concentrations from 200 to 10,000ppm with this fast-response, high-sensitivity MQ-6 sensor for your next safety or science project.

A 4-pack of 9V battery holders with sliding cover, built-in switch, and 6-inch 26AWG wires, ready to power your next electronics build.

This 100-piece multicolor pack of chenille sticks (pipe cleaners) is a classic craft and electronics staple for shapes, figures and quick builds.

Turn your Oxocard Connect into a 38-voice polyphonic synth with 128 MIDI instruments, drum kits, reverb, and more onboard effects.

Add a synthesizer keyboard to your micro:bit with Synth:bit's 16-input matrix, built-in audio jack, and portable battery pack.

Power your Petoi quadruped robot for about an hour of continuous walking with this slide-in Li-ion battery pack.

Expand your Petoi robot's senses with this module pack for light, distance, and more — unlocking new robotics, IoT, and AI projects.

Build a resilient mesh network with the IP-65 rated, all-in-one SenseCAP T1000-E Meshtastic radio from Seeed Studio.

Unlock ESP32-S3 powered WiFi and Bluetooth pentesting tools on your Flipper Zero with this Marauder add-on module.

Analyze CAN bus networks with your Flipper Zero using this MCP2515-based pentesting add-on for hardware security research.

Power your electronics builds with this 9V battery case duo, featuring a sliding cover, on/off switch, and wired leads ready to wire in.

This 9g FS90 180-degree mini servo is ideal for robotics and small car builds, and wires up easily with Arduino, micro:bit and Makey:bit projects.

Analyze Sub-GHz IoT traffic on your Flipper Zero with this CC1101 and LoRa dual RF add-on module for security researchers.

The bit:booster, designed by educators, unlocks physical computing on the micro:bit right out of the box, no extra parts needed.

Combine Magspoof and ESP32-S3 Marauder capabilities in one Flipper Zero add-on for expanded wireless security research options.

The bit:buddy+ packs full pin access into an Altoids-tin-sized form factor, built for advanced micro:bit and CLUE projects.

Add wired Ethernet network analysis to your Flipper Zero with this pentesting add-on built for WiFi-free environments.

Add remote control to any pedal with an expression jack, or combine volume and expression in one unit with this versatile slider from MAS Effects.

Monitor air quality anywhere with this USB-C CO2 sensor traffic light—plug it into any PC or charger at home, school, or the office.

Bring MagSpoof magstripe research capability to your Flipper Zero with this open-source security research add-on module.

Record muscle electrical activity for motor control and robotics interface experiments with these large surface EMG patch electrodes.

Mission Control adds an OLED screen, buttons, joystick and battery power to your micro:bit — a lightweight add-on for building your own remote.

Interact with industrial Modbus RTU networks using this Flipper Zero add-on featuring an SP3485EN transceiver for sniffing and analysis.

Make your existing light fixtures smarter with the Ironsmith In-line Smart Switch—simple, effective home automation control.

Reuse parts across kits with these 10-inch Open Hardware Cables, designed for micro:bit, Makey:bit, Arduino, and Raspberry Pi setups.

Protect your motor wires while lighting up your build with CLRacing's 6-LED PCB wire 4-pack, available in six vibrant colors and multiple sizes.

The Jetpack Booster adds an H-Bridge to your Makey:bit for driving DC motors — solder-your-own expansion supported by popular micro:bit coding tools.